Europe/Rome Login

GRICU 2025 Congress & GRICU/NEST Doctoral School + CAPE Forum 2025

14-20 settembre 2025
Hotel Continental****
Europe/Rome timezone

Contact

Contribution List

284 / 284
279. Flexible manufacturing and the circular economy
Maurizio Masi (Politecnico di Milano) , Nino Grizzuti (Università degli Studi di Napoli Federico II)
15/09/25, 08:30
277. Engineering targeted and accessible medicine
Elisa Cimetta (Università di Padova) , Pier Luca Maffettone (Università degli Studi di Napoli Federico II)
15/09/25, 09:15
232. 041 - Graphite Recycle Strategies: LCA-based environmental impact evaluation
Andrea Murelli (aDepartment of Chemistry, Materials and Chemical Engineering “Giulio Natta”, Politecnico di Milano, Milan, Italy)
15/09/25, 10:00
202. ID006- Ammonia-based systems integrated with fuel cells for electrical power generation
Danilo Russo (Dipartimento di Ingegneria Chimica, dei Materiali e della Produzione Industriale, Università degli Studi di Napoli Federico II, Napoli, Italia)
15/09/25, 10:00
203. ID021 - Exploiting different heat supply strategies for on-board methanol reforming
Giuseppe Andriani (Università degli Studi di Padova, Dipartimento di Ingegneria Industriale, Padova, Italia.)
15/09/25, 10:00
204. ID025 - Advanced Nanocomposites for Hydrogen Storage: From Material Design to Processability
Giorgia De Piano (Department of Industrial Engineering, University of Salerno, Fisciano (SA), Italy)
15/09/25, 10:00
226. ID026 - Sustainable solutions for the production of electrical cable insulators via polyethylene silane-crosslinking
Maria Teresa Letizia (University School for Advanced Studies IUSS, Pavia (PV), Italy; Department of Industrial Engineering, University of Salerno, Fisciano (SA), Italy)
15/09/25, 10:00
205. ID035 - Hybrid resonant-traveling microwave reactor for high temperature catalytic reactions
Mirko Scanferla (University of Padua, Department of Industrial Engineering, Padua, Italy)
15/09/25, 10:00
206. ID045 - Study on natural and synthetic CO₂ adsorbents for application as supplementary cementitious materials
Andrea Busotti (Department of Chemistry, Materials and Chemical Engineering “Giulio Natta”, Politecnico di Milano, Milano, Italy)
15/09/25, 10:00
235. ID049 - Recycling PC/ABS: Environmental Assessment of Pyrolysis through Process Simulation and Life Cycle Assessment
Stefano Redaelli (Department of Chemistry, Materials and Chemical Engineering “Giulio Natta”, Politecnico di Milano, Milan, Italy)
15/09/25, 10:00
229. ID054 - Enhancing Polymer Blends Compatibility: From Bulk Thermodynamics to Compatibilizer Chemical Architecture
Antonio Mazzei (University of Bologna, Bologna (BO) – Italy)
15/09/25, 10:00
238. ID058 - Textile Recycle to Fiber
Luca Zola (Department of Chemistry, Materials and Chemical Engineering “Giulio Natta”, Politecnico di Milano, Milan, Italy; A2A Life Company, Brescia (BS), Italy)
15/09/25, 10:00
228. ID063 - Modelling of Electrochemically Enhanced Leather Tanning
Marco Marinsalta (Department of Chemistry, Materials and Chemical Engineering “Giulio Natta”, Politecnico di Milano, Milan, Italy)
15/09/25, 10:00
207. ID064 - Development a sustainable CO2 mineralization process using alkaline industrial waste for enhanced carbon sequestration
Ilaria Tocci (Dipartimento di Ingegneria, Università degli Studi della Campania Luigi Vanvitelli, Aversa (CE), Italy)
15/09/25, 10:00
239. ID065 - Integrating Industry 5.0 Safety Principles into Human Performance Models
Carlos Albarrán Morillo (Applied Science and Technology Department, Politecnico di Torino, Turin, Italy)
15/09/25, 10:00
208. ID074 - Influence of Electrodes/Separator Lamination on Structural and Electrochemical Properties of NMC811/Graphite Cells
Dr. Daniele Versaci (Electrochemistry Group, Department of Applied Science and Technology (DISAT), Politecnico di Torino, Torino)
15/09/25, 10:00
227. ID098 - Toward Sustainable 3D Printing: Developing High-Performance Photocurable Resins from Waste Chemical
Francesca Lopriore (Dept of Chemistry, Materials and Chemical Engineering “Giulio Natta” (Politecnico di Milano, Milan, Italy))
15/09/25, 10:00
209. ID117 - Biomass and Plastic Waste Valorisation: Pyrolysis in a Spouted Bed Reactor
Muhammad Saad Mansha (Department of Civil, Chemical and Environmental Engineering, University of Genoa, Genoa, Italy)
15/09/25, 10:00
210. ID120 - Solar-assisted thermocatalytic conversion of plastic wastes: study of the utilization of ZnCl2-based heat transfer fluids as reaction media and catalysts
Najwa Hamdi (Dipartimento di Ingegneria, Università degli Studi di Palermo, Palermo, Italy)
15/09/25, 10:00
211. ID128 - Effect of acid and basic pretreatment on the performance of hydrothermal liquefaction of waste biofeedstocks
Alessandro Galia (Università degli Studi di Palermo)
15/09/25, 10:00
234. ID138 - Plasbreaker: a novel pyrolysis technology for mixed plastic waste recycling
Stefano Redaelli (Department of Chemistry, Materials and Chemical Engineering “Giulio Natta”, Politecnico di Milano, Milan, Italy)
15/09/25, 10:00
225. ID139 - Challenges in 3D Printing of Semi-Crystalline Polymers
Targol Hashemi (Department of Industrial Engineering, University of Salerno, Fisciano (SA), Italy)
15/09/25, 10:00
212. ID152 - Modelling hybrid membrane processes for CO₂ Capture from Flue Gas
Ferruccio Doghieri (Dept. Civil, Chemical, Environmental and Materials Engineering (DICAM), University of Bologna, Bologna, Italy)
15/09/25, 10:00
213. ID166 - Green-based water lean solvents for CO2 capture
Filippo Marchelli (PERT - Process Engineering Research Team, Department of Civil, Chemical and Environmental Engineering, University of Genova, Genova, Italy)
15/09/25, 10:00
237. ID177 - Advanced Thermal Characterization of 3D-Printed Metallic Triply Periodic Minimal Surface structures for Efficient Heat Dissipation
Claudio Tosto (University of Catania, Catania, Italy)
15/09/25, 10:00
214. ID187 - Enhancing Italian Research Infrastructure for CO2 Capture and Transport: Contributions from the ECCSELLENT Project
Zahra Maghazeh (Department of Civil, Chemical, Environmental and Materials Engineering, University of Bologna, Bologna, Italy)
15/09/25, 10:00
215. ID188 - Advanced silica-based nanostructured materials for simultaneous methanation of carbon oxides
Anastasia Macario (Department of Environmental Engineering, University of Calabria, Rende (CS), Italy)
15/09/25, 10:00
216. ID196 - Decarbonization of the maritime sector through fuel shift and carbon capture technologies
Martina Zabatta (Department of Chemical, Materials and Production Engineering, University of Naples Federico II, Naples, Italy)
15/09/25, 10:00
217. ID197 - SERGIO: “Sustainable Photoelectrochemical Hydrogen Evolution"
Anastasia Macario (Department of Environmental Engineering, University of Calabria, Rende (CS), Italy)
15/09/25, 10:00
218. ID206 - Influence of the properties, collection, and storage of waste cooking oils on the biodiesel production
Catia Giovanna Lopresto (Department of Computer Science, Modeling, Electronics and Systems Engineering (University of Calabria, Rende, Italy))
15/09/25, 10:00
233. ID218 - Upcycling Spent Catalysts into Novel Metal-doped Carbon Catalysts via Electrospray Deposition
Francesco Di Natale (Università di Napoli Federico II – Dipartimento di Ingegneria Chimica, dei Materiali e della Produzione Industriale, Napoli, Italy)
15/09/25, 10:00
219. ID239 - Evaluation of fuel options for marine MCFC-integrated carbon capture systems
Dario Bove (Università degli Studi di Genova – Dipartimento di Ingegneria Civile, Chimica e Ambientale , Genova, Italy)
15/09/25, 10:00
220. ID240 - Unravelling anion exchange membrane electrolysis cells through a multiscale approach
Barbara Bosio (Università di Genova)
15/09/25, 10:00
236. ID247 - Graphite recovery from spent alkaline batteries
Hossein Shalchian (Department of Industrial and Information Engineering and Economics (DIIIE), Engineering Headquarters of Roio, University of L’Aquila, L’Aquila, Italy)
15/09/25, 10:00
221. ID250 - Fast pyrolysis in a fluidized bed reactor: the role of heterogeneous secondary reactions and char loading
Maurizio Troiano (Università degli Studi di Napoli Federico II, Naples, Italy)
15/09/25, 10:00
230. ID259 - Electrodialysis with bipolar membranes for acid and base production: a pilot scale investigation with real bitterns
Simona M. Asaro (Dipartimento di Ingegneria, Università degli Studi di Palermo, Palermo, Italy)
15/09/25, 10:00
231. ID260 - Shaping Mg(OH)2 crystals through hydrothermal treatment
Ferdinando Miciletta (Dipartimento di Ingegneria, Università degli Studi di Palermo, Palermo, Italy; ResourSEAs SrL, Palermo, Italy)
15/09/25, 10:00
224. ID261 - Green and Sustainable Urban Mining of Noble Metals
Francesco Di Natale (Università di Napoli Federico II – Dipartimento di Ingegneria Chimica, dei Materiali e della Produzione Industriale, Napoli, Italy)
15/09/25, 10:00
10. ID199 - Integrating CO2 Capture into Thermal Desalination Systems: A Dual-Purpose Approach to Climate-change Mitigation and Freshwater Production
Erika Ballini (Research Unit of Process Engineering, Department of Science & Technology for Sustainable Development & One Health, University Campus Bio-Medico di Roma, Rome, Italy)
15/09/25, 10:45
44. ID214 - Silver Recovery from End-of-Life Photovoltaic Panels: Pretreatment with Sulfuric Acid and Leaching via Hydro-PV Process
Payam Ghorbanpour Khamseh (Department of Industrial and Information Engineering and Economics (DIIIE), Engineering Headquarters of Roio, University of L’Aquila, L’Aquila, Italy)
15/09/25, 10:45
39. 112 - Thermodynamic Properties Prediction of Oxygenated Components: Using Different Versions of SAFT Equations of State (EOS)
Iman Bahrabadi Jovein (Department of Civil, Chemical, Environmental and Materials Engineering, University of Bologna,Bologna, Italy; Eni S.p.A., TECH - Research & Technological Innovation Department, San Donato Milanese, Milan, Italy)
15/09/25, 11:00
12. 202 - Seasonal Evaluation of Microalgae-Based Wastewater Treatment for Biomass Valorisation
Laura Bernacchioni (Department of Civil, Chemical, Environmental and Materials Engineering (DICAM), Alma Mater Studiorum – University of Bologna, Italy)
15/09/25, 11:00
1. 31 - Enhancing scalability and sustainability of next-gen LIBs anode through optimized dual-binder design
Daniele Versaci (Electrochemistry Group, Department of Applied Science and Technology (DISAT), Politecnico di Torino, Torino)
15/09/25, 11:00
22. 84 - Exploiting hybrid modelling strategies for predicting intestinal solubility
Marco Brendolan (CAPE-Lab, Computer-Aided Process Engineering Laboratory, Department of Industrial Engineering, University of Padova, Italy)
15/09/25, 11:00
13. 194 - Design and characterization of Hybrid gelatin/PEGDA hydrogels with tunable viscoelastic properties
Salvatore Costanzo (Department of Chemical, Materials and Production Engineering, University of Naples Federico II, Naples, Italy)
15/09/25, 11:15
40. 255 - A study on microalgal biomass harvesting by flocculation and centrifugation
Alessandro Alberto Casazza (Department of Civil, Chemical and Environmental Engineering, University of Genoa, Genoa, Italy)
15/09/25, 11:15
2. 36 - Sequence of Non-linear Real-Power Mass Transfer Resistances in Composite Thin Films: Optimal Layer Distribution and Permeance Ratio
Giuseppe Prenesti (University of Calabria, Department of Computer Engineering, Modelling, Electronics and Systems Engineering (DIMES), Rende, Italy)
15/09/25, 11:15
23. 87 - 4D Microscale Modelling of Lithium-Ion Battery Performance: SEI Growth and Data-Driven Surrogate Modelling
Elisa Buccafusco (Politecnico di Torino, Torino, Italy)
15/09/25, 11:15
41. 136 - A New Route to Hydrogen: Multiscale Conceptual Design of H2S Thermal Splitting Process
Simone Caspani (Politecnico di Milano, Department CMIC "Giulio Natta", Milan, Italy)
15/09/25, 11:30
31. 221 - From Electrical Signals to Spray Mode Control: An eXplainable AI Framework for Electrospray Processes
Luigi Piero Di Bonito (Dipartimento di Ingegneria Chimica, dei Materiali e della Produzione Industriale, Università degli Studi di Napoli “Federico II”, Napoli, Italia)
15/09/25, 11:30
175. 237 - Characterization of microbial electrolysis cell’s bioanode performances through potentiostatic and potentiodynamic techniques
Marco Zeppilli (Department of l Chemistry, University of Rome Sapienza, Rome, Italy)
15/09/25, 11:30
14. 62 - Safety Analysis of Aqueous Formate Solu3on based Large Scale Hydrogen Storage
Fabrizio Di Franco (Dipar&mento di Ingegneria Chimica, dei Materiali e della Produzione Industriale, Università degli Studi di Napoli Federico II, Naples, Italy)
15/09/25, 11:30
15. 145 - Integrated pyrolysis–steam reforming of biomass and plastic waste for renewable methanol production: experimental validation and process simulation
Mariangela Guastaferro (University of Pisa, Department of Civil and Industrial Engineering, Pisa (Italy))
15/09/25, 11:45
5. 68 - Assessment of Net Equivalent Hydrogen Delivered by Selected Hydrogen Carriers
Federica Restelli (GASP - Group on Advanced Separation Processes & GAS Processing, Dipartimento di Chimica, Materiali e Ingegneria Chimica “G. Natta”, Politecnico di Milano, Milano, Italy)
15/09/25, 11:45
32. 83 - Pore Scale CFD Simulation To Investigate Transport Phenomena In Multiphase Catalytic Packed-Bed Reactors
Diego Fida (Politecnico di Torino, DISAT, Institute of Chemical Engineering, Torino, Italy)
15/09/25, 11:45
42. 95 - Recovery of volatile fatty acids from digestate: proof of concept
Simeone Chianese (Department of Engineering, University of Campania Luigi Vanvitelli, Aversa, Italy)
15/09/25, 11:45
6. 126 - Hydrogen Generation Through Cavitation-Based Water Splitting
Mario Luiso (Dipartimento di Ingegneria, Università degli Studi della Campania “Luigi Vanvitelli”, Aversa, Italy)
15/09/25, 12:00
16. 205 - Eco-sustainable pretreatment for biodiesel production in a green chemistry perspective
Catia Giovanna Lopresto (Department of Computer Science, Modeling, Electronics and Systems Engineering (University of Calabria, Rende, Italy))
15/09/25, 12:00
43. 244 - From waste to energy: biogas production using olive pomace through anaerobic digestion
Giulia D'Agostino (Department of Civil, Chemical and Environmental Engineering, University of Genoa, Genoa, Italy; National Research Centre for Agricultural Technologies (CN AgriTech), Naples, Italy )
15/09/25, 12:00
33. 5 - Towards optimal model selection: a trade-off between calibration effort and prediction accuracy
Margherita Geremia (CAPE-Lab – Computer-Aided Process Engineering Laboratory. Department of Industrial Engineering, University of Padova, Padova, Italy)
15/09/25, 12:00
34. 147 - Multiscale circular economy process simulation and optimization
Nicolas Iannotta (Politecnico di Milano, CMIC Dept. “Giulio Natta”, Milano, Italy)
15/09/25, 12:15
7. 172 - Gas-solid reaction modeling: CO2 adsorption in potassium-doped lithium orthosilicate
Flavio Francalanci (Dipartimento di Ingegneria Civile e Industriale, University of Pisa, Italia)
15/09/25, 12:15
45. 215 - Carbon-Based Film Production via Electrospray Deposition
Arianna Parisi (Università di Napoli Federico II – Dipartimento di Ingegneria Chimica, dei Materiali e della Produzione Industriale, Napoli, Italy)
15/09/25, 12:15
17. 238 - Bioelectrochemical Hydrogen Production in a Three-Chamber MEC: Integrating OF-MSW Treatment and Renewable Energy Recovery
Angela Marchetti (Department of Environmental Sciences, Informatics and Statistics Ca’ Foscari University of Venice, Italy)
15/09/25, 12:15
18. 129 - Bioelectrochemical systems for coupled wastewater treatment and energy production
Vittoria Maria Iris Piro (Department of Mechanical, Chemical and Materials Engineering University of Cagliari, Italy)
15/09/25, 12:30
71. 14 - Optimization of a system for the upcycling of organic waste by sorption-enhanced methanol synthesis
Emanuele Moioli (Politecnico di Milano, Milano, Italy)
15/09/25, 12:30
8. 178 - One-Pot Hydrogen Production and Carbon Valorization via Innovative Borate-boosted Bio-alcohol Conversion
Alessandra Di Nardo (Institute of Science and Technology for Sustainable Energy and Mobility, CNR, Naples, Italy)
15/09/25, 12:30
35. 7 - Breaking Modeling Boundaries: the Strategic Advantage of Hybrid Approaches in PSE
Tiziana Marella (CAPE-Lab – Computer-Aided Process Engineering Laboratory. Department of Industrial Engineering. University of Padova, Padova (Italy))
15/09/25, 12:30
47. 148 - Kinetic modelling tools for the circular carbon economy: from hydrogen production to carbon materials
Luna Pratali Maffei (Dipartimento di Chimica, Materiali e Ingegneria Chimica “Giulio Natta”, Politecnico di Milano, Italia)
15/09/25, 12:45
9. 198 - Process simulation of biohydrogen production through sorption-enhanced steam reforming and conventional steam reforming processes
Elshaday Mulu Fetene (Dipartimento di Ingegneria Chimica, dei Materiali e della Produzione Industriale (DICMaPI), Università degli Studi di Napoli Federico II, Naples, Italy)
15/09/25, 12:45
36. 236 - Data-driven modeling for advanced process control: research directions and some examples
Gabriele Pannocchia (University of Pisa, Pisa, Italia)
15/09/25, 12:45
19. 75 - First-Principles Modelling of Solid Oxides Cell’s Electrodes
Andrea Pizzato (Department of Industrial Engineering, University of Padua, Padua, Italy)
15/09/25, 12:45
37. 16 - ANN-based surrogate modelling for short- and long-term performance optimization of COX methanation reactors
Mauro Andrea Pappagallo (Paul Scherrer Institut, Villigen, Switzerland)
15/09/25, 13:00
149. 226 - Desublimation in Packed and Tray Columns for Gas Mixture Separation and Carbon Capture
Erika Ballini (Research Unit of Process Engineering, Department of Science & Technology for Sustainable Development & One Health, University Campus Bio-Medico di Roma, Rome, Italy)
15/09/25, 13:00
48. 264 - Biocatalyst development for CO2 capture and utilization by enzymatic cascade process
Maria Elena Russo (Dipartimento di Ingegneria Chimica dei Materiali e della Produzione Industriale, Università degli Studi di Napoli Federico II, Napoli, Italy)
15/09/25, 13:00
20. 57 - Evaluation of multi-stage Osmotically Assisted Reverse Osmosis configurations for high-salinity wastewater treatment
Mattia Turetta (Department of Industrial Engineering DII, University of Padova, Padova, Italy )
15/09/25, 13:00
38. 125 - Optimizing the Computational Time for Surrogate Model Training in Complex Chemical Process Simulations: An Application of the Traveling Salesman Problem
Luis Felipe Sánchez (CMIC Department "Giulio Natta", Politecnico di Milano, Milano, Italy)
15/09/25, 13:15
58. 233 - Photocatalytic Membrane Reactors: New Perspective for Persistent Organic Pollutants Removal in Urban Wastewater
Vincenza Calabrò (Department of Computer Engineering, Modeling, Electronics and Systems (DIMES), University of Calabria, Rende, Italy)
15/09/25, 13:15
11. 242 - Evaluation of fluctuating condition reactors for e-methanol synthesis
Umer Draz (DICCA, University of Genova, Genova, Italy)
15/09/25, 13:15
278. Safe and sustainable engineering solutions for environmental systems
Onofrio Scialdone (Dipartimento di Ingegneria, Università degli Studi di Palermo, Palermo, Italy) , Valerio Cozzani (Laboratory of Industrial Safety and Environmental Sustainability (Alma Mater Studiorum – University of Bologna, Bologna, Italy))
15/09/25, 14:30
80. 101 - Towards Digital Twin Technologies for the Food Industry
Marcello Maria Bozzini (CMIC Department "Giulio Natta", Politecnico di Milano, Milan, Italy)
15/09/25, 15:45
72. 103 - Milk Whey Extracellular Vesicles as a Drug Delivery System for Neuroblastoma Therapy
Cristiana Boi (Department of Civil, Chemical, Environmental and Material Engineering (DICAM), University of Bologna, Italy; Department of Chemical and Biomolecular Engineering, North Carolina State University, Raleigh, USA)
15/09/25, 15:45
57. 48 - Water reuse after treatment of industrial wastewater from the peroxide and peracetic acid production
Alessia Cherubini (Department of Materials, Environmental and Urban Engineering, Università Politecnica delle Marche, Ancona, Italy)
15/09/25, 15:45
49. 77 - An Integrated Approach to CO₂ Methanation: catalyst synthesis, advanced reactor design and process simulation.
Stefano Giovanni Acierno (Department of Chemical, Materials and Production Engineering, University of Naples Federico II, Naples, Italy)
15/09/25, 15:45
81. 118 - Development of a Predictive Model for the Sauter Mean Diameter in Emulsion-Based Processes for Food and Nutraceutical Applications
Chiara Bufalini (Department of Civil, Chemical and Environmental Engineering, University of Genoa, Genoa, Italy)
15/09/25, 16:00
50. 180 - Material and Process Innovations for High-Performance MCFC Technologies
Dario Bove (Università degli Studi di Genova – Dipartimento di Ingegneria Civile, Chimica e Ambientale , Genova, Italy)
15/09/25, 16:00
200. 258 - Development of innovative adsorbents and photocatalysts to remove emergent contaminants
Domenico Pirozzi (CIRAM, University of Naples “Federico II”, Naples, Italy; DICMaPI, University of Naples “Federico II”, Naples, Italy)
15/09/25, 16:00
140. 30 - Translating 2D to 3D Polymeric MicroStructures: An Engineering Approach to Next-Generation materials
Concetta Di Natale (Dipartimento di Ingegneria Chimica, dei Materiali e della Produzione Industriale, Università degli Studi di Napoli Federico II, Naples, Italy)
15/09/25, 16:00
51. 134 - Cheap and Zero-Sources CCU Processing: What about the CO2 Reduced by Other Emissions?
Flavio Manenti (Politecnico di Milano, Department CMIC "Giulio Natta", Milan, Italy)
15/09/25, 16:15
74. 141 - Synthesis of WRG-decorated Nanogels as combo therapy for ovarian cancer
Andrea De Filippis (Department of Chemistry, Materials and Chemical Engineering “G. Natta”, Politecnico di Milano, Milan, Italy)
15/09/25, 16:15
60. 150 - 3D Foam-Printing for a novel approach to design of advanced structured packing for gas purification technology
Domenico Flagiello (Department of Chemical, Materials and Production Engineering, University of Naples Federico II, Naples, Italy)
15/09/25, 16:15
82. 229 - PLA-PET Copolymer For Food Packaging Application
Silvia Carichino (Dept. Innovation Engineering (University of Salento, Lecce, Italy))
15/09/25, 16:15
61. 161 - Development of an adsorption/desorption process to remove pharmaceuticals from wastewater: from sorbent screening to fixed-bed column tests
Elisa Girometti (Department of Civil, Chemical, Environmental and Materials Engineering, University of Bologna, Bologna, Italy)
15/09/25, 16:30
83. 200 - Development and evaluation of a thin-layer photobioreactor for optimizing light influence on microalgal cultivation
Alessandro Cosenza (Department of Engineering, University of Palermo, Palermo, Italy)
15/09/25, 16:30
75. 245 - The mesoscopic approach to structural biology: an inspiring frontier of research of thermodynamics applied to molecular bioengineering
Luisa Di Paola (Unit of Chemical-Physics Fundamentals in Chemical Engineering, Faculty Department of Sustainable Development and One Health, Università Campus Bio-Medico of Rome, Rome, Italy)
15/09/25, 16:30
52. 92 - Graphene Oxide Multilayers for Next-Generation Thin Film Gas Separation Membranes
Roberta Di Carlo (Dept. of Civil, Chemical, Environmental and Material Engineering, University of Bologna, Italy)
15/09/25, 16:30
62. 174 - Maximizing Material and Energy Recovery Processes Through Industrial Symbiosis Within The Waste-Wastewater–Energy Nexus
Antonella Luciano (ENEA, Department for sustainability, Rome, Italy)
15/09/25, 16:45
84. 186 - Valorization of (semi-)dry Agri-Food Wastes by Torrefaction
Michele Miccio (Department of Industrial Engineering (DIIn), University of Salerno, Fisciano (SA), Italy)
15/09/25, 16:45
76. 263 - A Rheo-Optical Compression Assay for Viscoelastic Characterization of Cellular Spheroids
Rosalia Ferraro (Università degli Studi di Napoli Federico II, Dipartimento di Ingegneria Chimica, dei Materiali e della Produzione Industriale, Napoli, Italy; CEINGE Biotecnologie Avanzate Franco Salvatore, Napoli, Italy)
15/09/25, 16:45
53. 39 - Hydrogen and Oxygen bubble detachment from nanowire-based electrode in alkaline electrolyzers
Salvatore Geraci (Department of Engineering, Università degli Studi di Palermo, Palermo, Italy; Sustainable Mobility Center (Centro Nazionale per la Mobilità Sostenibile—CNMS).)
15/09/25, 16:45
54. 10 - From downside to upside: leveraging permeance inhibition to enhance hydrogen production in membrane steam reformers
Antonio Brasiello (Dipartimento di Ingegneria Chimica Materiali Ambiente, Università degli Studi di Roma “La Sapienza”, Roma, Italia)
15/09/25, 17:00
77. 157 - Production of bone scaffolds with hierarchical porous structure via 3D printing and Supercritical CO2 leaching.
Sara Liparoti (Department of Industrial Engineering, University of Salerno, Fisciano (SA), Italy))
15/09/25, 17:00
63. 193 - Development of an Efficient Continuous Photocatalytic System for Sustainable Wastewater Treatment
Domenico Rosa (Department of Chemical Engineering Materials Environment (Università La Sapienza, Rome, Italy))
15/09/25, 17:00
85. 225 - Ultrasound effects on SoLVE process applied to the extraction of polyphenols from olive pomace: a techno-economic study
Margherita Pettinato (Department of Civil Chemical and Environmental Engineering, Genoa, Italy)
15/09/25, 17:00
86. 109 - Innovative agriculture: bicontinuous structures as delivery systems for fertilizers and pesticides
Fabio Pizzetti (Department of Chemistry, Materials and Chemical Engineering “Giulio Natta”, Politecnico di Milano, Milan, Italy)
15/09/25, 17:15
64. 160 - Quantitative Modelling and LCA for Sustainable Lithium-Ion Battery Recycling: Indicators, Bottlenecks, and Policy Implications
Marco Vaccari (Universitá di Pisa, Pisa, Italia)
15/09/25, 17:15
55. 251 - CO2 methanation: from laboratory to full scale validation
Matteo Percivale (University of Genoa, DICCA and DCCI Departments, Genoa, Italy; Materials & Processes Engineering, Baker Hughes, Firenze, Italy; Climate Technology Solutions, Baker Hughes, Firenze, Italy)
15/09/25, 17:15
78. 96 - Biomimetic hollow fiber membranes for organ support
Gabriele Malagoli (Department of Civil, Chemical, Environmental and Materials Engineering, University of Bologna, Italy)
15/09/25, 17:15
87. 19 - A bioprocess engineering approach to produce renewable protein by nitrogen fixing cyanobacteria
Eleonora Sforza (BiERLab, Department of Industrial Engineering, University of Padova, Italy)
15/09/25, 17:30
79. 69 - A Microfluidic Blood-Brain Barrier Model for Studying Monocyte-Mediated Oncolytic Virus Delivery to Glioblastoma
Sara Micheli (Department of Industrial Engineering, University of Padua, Padua, ITALY; Fondazione Istituto di Ricerca Pediatrica Città della Speranza, Padua, ITALY)
15/09/25, 17:30
56. 72 - Enabling Green NH3: A Path to Decentralized Energy Futures
Elvira Spatolisano (GASP - Group on Advanced Separation Processes & GAS Processing, Dipartimento di Chimica, Materiali e Ingegneria Chimica “G. Natta”, Politecnico di Milano, Milan, Italy)
15/09/25, 17:30
192. 119 - Integrated Process Modeling and LCA for Prospective Environmental Evaluation of Synthetic CO2 Sorbents in Carbonate Looping Systems
Valerio Cozzani (Laboratory of Industrial Safety and Environmental Sustainability (Alma Mater Studiorum – University of Bologna, Bologna, Italy))
15/09/25, 17:45
276. Chemical engineering in the digital era
Chiara Galletti (Università di Pisa) , Daniele Marchisio (Politecnico di Torino)
16/09/25, 08:30
280. Engineering solutions for sustainable food and feed
Franscesco Donsì (Università di Salerno) , Patrizia Perego (Università di Genova)
16/09/25, 09:15
262. ID009 - Experimental Investigation of Plastic Waste Catalytic Steam Gasification
Armando Vitale (Industrial Engineering Department, University of L’Aquila, L’Aquila, Italy)
16/09/25, 10:00
251. ID012 - When Small-Scale Meets High Risk: Quantitative Risk Assessment of a Fischer-Tropsch Academic Experimental Setup
Paolo Mocellin (Università degli Studi di Padova, Dipartimento di Ingegneria Industriale, Padova, Italia; Università degli Studi di Padova, Dipartimento di Ingegneria Civile, Edile e Ambientale, Padova, Italia.)
16/09/25, 10:00
253. ID015 - Performance of a Novel Steam Reforming Catalyst under Real Gasification Conditions for H2-Rich Syngas Production
Alessandro Antonio Papa (Industrial Engineering Department, University of L’Aquila, L’Aquila, Italy)
16/09/25, 10:00
260. ID023 - Fluid Dynamic Optimization of Electrodes Design for CO2 Electroreduction to Formate
Riccardo Sette (University of Padova, Padova, Italy)
16/09/25, 10:00
274. ID027 - Advantages of AI-based regressions for the kinetic modelling of industrial catalysts
Hugo Pétremand (Paul Scherrer Institute, Villigen, Switzerland)
16/09/25, 10:00
264. ID029 - Electroconductive hydrogels for spinal cord regeneration
Zoe Giorgi (Department of Chemistry, Materials and Chemical Engineering “Giulio Natta”, Politecnico di Milano, Milan, Italy)
16/09/25, 10:00
270. ID042 - Improving Energy Efficiency in Ethanol Distillation: Simulation and Economic Assessment of Heat Pump Integration
Federico Cecchini (Department of Industrial Information and Engineering and of Economics, University of L’Aquila, Italy)
16/09/25, 10:00
267. ID060 - Next-Generation Active Packaging: zein-based biocomposites functionalized with antioxidants from agrifood wastes
Chiara Bufalini (Department of Civil, Chemical and Environmental Engineering, University of Genoa, Genoa, Italy)
16/09/25, 10:00
265. ID097 - Innovative, sustainable, fast one-step synthesis to produce iron oxide nanoparticles for the biomedical field
Laura Turilli (Department of Industrial and Information Engineering and Economics, University of L’Aquila, L’Aquila, Italy)
16/09/25, 10:00
248. ID099 - Development of a Pilot Plant for CH4 and CO2 Capture from Cattle Barns: From Experimental Tests to Process Simulations
Alice Gramegna (Department of Chemistry, Università degli Studi di Milano, Milan, Italy; INSTM Unit Milano-Università, Milan, Italy)
16/09/25, 10:00
247. ID114 - Characterization of high-performance polymers for gas barrier applications
Perla Gavagni (Department of Civil, Chemical, Environmental and Material Engineering (University of Bologna, Bologna, Italy); DPI (DPI, Eindhoven, the Netherlands) c Institute for Materials and Processes (University of Edinburgh, Edinburgh, United Kingdom))
16/09/25, 10:00
269. ID121 - Possible countermeasures for protection against industrial incidents caused by cyber-attacks in the process industry
Salvina Murè (Politecnico di Torino)
16/09/25, 10:00
242. ID122 - Advancements in Resilience Modelling for Industrial Infrastructures: A Multi-Hazard Comprehensive Approach
David J. Castro Rodriguez (Department of Applied Science and Technology (Politecnico di Torino, Torino, Italy))
16/09/25, 10:00
245. ID133 - Exhaust gas cleaning systems for marine engines fuelled with hydrogen, ammonia and methanol
Domenico Flagiello (Department of Chemical, Materials and Production Engineering, University of Naples Federico II, Naples, Italy)
16/09/25, 10:00
246. ID135 - Integration of an EGCS on methanol-fueled HT-PEM fuel cells for sustainable maritime shipping
Domenico Flagiello (Department of Chemical, Materials and Production Engineering, University of Naples Federico II, Naples, Italy)
16/09/25, 10:00
222. ID142 - From Waste Biomass to Hydrochar: A Circular Economy Strategy through Hydrothermal Carbonization
Eleonora Stefanelli (Dipartimento di Ingegneria Civile e Industriale, University of Pisa, Pisa, Italy)
16/09/25, 10:00
244. ID154 - Multivariate analysis of Thermal Runaway Behaviour in Aged Lithium-ion Batteries
Huxiao Shi (Politecnico di Torino, Department of Applied Science and Technology (DISAT))
16/09/25, 10:00
241. ID156 - Modeling Spontaneous Ignition in High-Pressure Hydrogen Jets via Computational Fluid Dynamics and Detailed Reaction Kinetics
Elena Capasso (Modeling and Engineering Risk and Complexity. Scuola Superiore Meridionale, School for Advanced Studies, Naples, Italy)
16/09/25, 10:00
254. ID158 - Low-temperature air pollutant abatement with AuNPs on manganese oxides: effect of crystalline structures and nanoparticle size
Marco Piumetti (Polytechnic of Turin, Department of Applied Science and Technology, Turin, Italy)
16/09/25, 10:00
255. ID159 - Risk assessment of Integrated Fuel Cell Systems for Rail Transport
Maria Portarapillo (Department of Chemical, Materials and Production Engineering, University of Naples Federico II, Naples, Italy)
16/09/25, 10:00
243. ID164 - CO2 electrochemical reduction on Sn cathode: effect of the nature and concentration of the supporting electrolyte
Andrea Di Franco (Dipartimento di Ingegneria, Università degli Studi di Palermo, Palermo, Italy)
16/09/25, 10:00
240. ID165 - Development of Eco-Friendly Insulating Refractories for Coke Oven Applications
Maia Clericuzio (Dipartimento di Ingegneria Civile, Chimica e Ambientale (DICCA) Università di Genova)
16/09/25, 10:00
250. ID167 - Membrane-less Electrolysis for Simultaneous Organic Load Removal and Hydrogen Production from Olive Mill Wastewater
Laura Mais (Department of Mechanical, Chemical and Materials Engineering University of Cagliari, Cagliari, Italy)
16/09/25, 10:00
259. ID168 - Measurements of Carbon Dioxide Solubility in Cyrene and Simulation of the Absorption Process
Valentina Schiattarella (GASP - Group on Advanced Separation Processes & GAS Processing, Dipartimento di Chimica, Materiali e Ingegneria Chimica “G. Natta”, Politecnico di Milano, Milano, Italy)
16/09/25, 10:00
275. ID173 - Improving LCA Data Accuracy through Digital Twin–Based Soft Sensors: A Comparative Application in Polymer Extrusion
Marco Piron (1CESQA (Quality and Environmental Research Centre), University of Padova, Department of Civil, Environmental and Architectural Engineering, Padova, Italy)
16/09/25, 10:00
256. ID182 - Towards Closed-Loop Water Management: Process Analysis of AOP-Membrane Systems in Municipal and Industrial WWTPs
Marina Prisciandaro (Department of Industrial Information and Engineering and of Economics, University of L’Aquila, Italy)
16/09/25, 10:00
249. ID189 - Scale-Up of Volatile Fatty Acids Recovery via Stripping
Valentina Innocenzi (Department of Industrial and Information Engineering and of Economics, University of L’Aquila, L’Aquila, Italy)
16/09/25, 10:00
272. ID190 - Analysis of past security incidents using Bayesian Network analysis
Matteo Iaiani (LISES – Department of Civil, Chemical, Environmental, and Materials Engineering, Alma Mater Studiorum – University of Bologna, Bologna (Italy))
16/09/25, 10:00
271. ID191 - Exploiting limited sets of experimental measurements to calibrate models for batch cooling crystallization
Mauro Davanzo (CAPE-Lab - Computer-Aided Process Engineering Laboratory, Department of Industrial Engineering, University of Padova, Padova PD, Italy)
16/09/25, 10:00
258. ID224 - Design and feasibility study of marine SCR units for methanol dual-fuel engines
Domenico Ricchiari (Department of Chemical, Materials and Production Engineering, University of Naples Federico II, Naples, Italy)
16/09/25, 10:00
257. ID228 - Electrochemical remediation of contaminated real marine sediments under very low electric fields
Federica Proietto (Dipartimento di Ingegneria, Università degli Studi di Palermo, Palermo, Italy)
16/09/25, 10:00
286. ID231 - Lead removal from contaminated water: comparative study of Sargassum spp. biomass and synthetic Geopolymer adsorbents
Catia Giovanna Lopresto (Department of Computer Science, Modeling, Electronics and Systems Engineering (University of Calabria, Rende, Italy))
16/09/25, 10:00
273. ID234 - Restyling CPCLAB: How to enhance our Chemical Process Control LABoratory
Riccardo Bacci di Capaci (University of Pisa, Pisa, Italia)
16/09/25, 10:00
261. ID241 - Bio-hydrogen from dark fermentation: a sustainable path for energy transition
Vincenza Calabrò (Department of Computer Engineering, Modeling, Electronics and Systems (DIMES), University of Calabria, Rende, Italy)
16/09/25, 10:00
266. ID246 - Design and Evaluation of a Solar-Powered Absorption Chiller for Off-Grid Refrigeration in Rural Tanzania
Luisa Di Paola (Unit of Chemical-Physics Fundamentals in Chemical Engineering, Faculty Department of Sustainable Development and One Health, Università Campus Bio-Medico of Rome, Rome, Italy)
16/09/25, 10:00
263. ID256 - An Antibacterial, Antioxidant Bioactive Composite Sponge Based on Biomimetic Gelatin and Alginate Dialdehyde for Hemostasis and Wound Healing
Pier Francesco Ferrari (Department of Civil, Chemical and Environmental Engineering, University of Genoa, Genoa, Italy; Research Center for Biologically Inspired Engineering in Vascular Medicine and Longevity, University of Genoa, Genoa, Italy; IRCCS Ospedale Policlinico San Martino, Genoa, Italy)
16/09/25, 10:00
223. ID257 - Integrated Bioprocesses for a Circular Carbon Economy
Marco Bravi (Dept. Chemical Engineering Materials Environment, Sapienza University of Roma, Italy)
16/09/25, 10:00
268. ID262 - Development of an innovative decontamination method tailored for the Biomedical and Food industry based on the utilization of supercritical carbon dioxide (scCO2)
Filippo Fabrizi (Superunita (University of Padua, Padua, Italy))
16/09/25, 10:00
139. ID254 - Exploring Hydrothermal Leaching for Selective Metal Recovery from Spent DeNOx catalysts
Pietro Romano (Department of Industrial and Information Engineering & Economics; University of L'Aquila; Italy)
16/09/25, 10:45
162. 211 - Inherently Safer Process Design applied to Polyhydroxyalkanoates Bioproduction from Wastes
Maria Bolla (Department of Civil, Chemical and Environmental Engineering, University of Genoa, Genoa, Italy)
16/09/25, 11:00
108. 222 - An eXplainable AI Framework for Hybrid Modelling and Optimization of Marine Scrubber Systems
Luigi Piero Di Bonito (Dipartimento di Ingegneria Chimica, dei Materiali e della Produzione Industriale, Università degli Studi di Napoli “Federico II”, Napoli, Italia)
16/09/25, 11:00
88. 44 - High Temperature Pyrolysis as a Tool for Energy Recovery: Waste from a Furniture Manufacturing Industry Case Study
Carlo Andreazza (University of Trieste, TS, Italy)
16/09/25, 11:00
98. 90 - Cryogenic liquid energy carriers: performance requirements for large-scale storages
Corinna Borsato (Laboratory of Industrial Safety and Environmental Sustainability (Alma Mater Studiorum – University of Bologna, Bologna, Italy))
16/09/25, 11:00
89. 102 - Performance Assessment and Feed Optimization of a Multitubular Methanol Synthesis Reactor Under Variable Operating Conditions
Marcello Maria Bozzini (CMIC Department "Giulio Natta", Politecnico di Milano, Milan, Italy)
16/09/25, 11:15
99. 130 - Safety management of atmospheric storage tanks by the modelling of bottom corrosion
Paolo Carbone (University of Messina, Messina, Italy)
16/09/25, 11:15
163. 131 - Techno-Feasibility Analysis and Detailed Process Simulation of Microwave Pyrolysis of Algae Residue and Oily Sludge for Advanced Fuel Production
Francesco de Fusco (CMIC Department "Giulio Natta", Politecnico di Milano, Milano, Italy)
16/09/25, 11:15
109. 183 - An automatic framework for continuous model development
Alessandro Stagni (Department of Chemistry, Materials, and Chemical Engineering “Giulio Natta” (Politecnico di Milano, Milano, Italy))
16/09/25, 11:15
100. 207 - Next Generation of Marine Scrubbers for Advanced Gas Cleaning
Francesco Di Natale (Università di Napoli Federico II – Dipartimento di Ingegneria Chimica, dei Materiali e della Produzione Industriale, Napoli, Italy)
16/09/25, 11:30
90. 223 - Catalytic cracking of methane over carbon-based catalysts
Enrico Catizzone (Chemical Engineering Catalysis and Sustainable Processes Laboratory, University of Calabria, Rende, Italy)
16/09/25, 11:30
110. 52 - AI-based soft sensor for real-time assessment of CO₂ and mycotoxins in hazelnut storage
Davide Fissore (Politecnico di Torino, Dipartimento di Scienza Applicata e Tecnologia, Torino, Italy)
16/09/25, 11:30
164. 70 - Hydrometallurgical recovery of gold from WEEE through selective leaching and adsorption with electrospun fibers
Antonio Di Colandrea (Dipartimento di Ingegneria Chimica, dei Materiali e della Produzione Industriale Università degli Studi di Napoli “Federico II”, Napoli, Italia)
16/09/25, 11:30
165. 155 - Phopshate recovery from wastewater by adsorption
Elisa Girometti (University of Bologna, Department of Civil, Chemical, Environmental & Materials Engineering, Bologna, Italy)
16/09/25, 11:45
91. 176 - A fundamental study of the Deep Injection-Floating Catalyst Chemical Vapor Deposition reactor via 3D reactive simulations
Nicolò Lisena (Laboratory of Catalysis and Catalytic Processes, Department of Energy, Politecnico di Milano, Italy)
16/09/25, 11:45
101. 67 - Flammability and Explosion Features of Lithium-Ion Bateries: effect of Cathode Chemistry and State of Charge
Domenico Enicchiaro (Dipar􀆟mento di Ingegneria Chimica, dei Materiali e della Produzione Industriale, Università degli Studi di Napoli Federico II, Italy.)
16/09/25, 11:45
111. 8 - Dynamic analysis of flooding phenomena in structured packed columns using advanced signal processing techniques
Pietro Giustacori (University of Pisa, Department of Civil and Industrial Engineering, Pisa, Italy)
16/09/25, 11:45
112. 110 - Dissipative Particle Dynamics as a Computational Tool to detect the Morphology-Rheology Interplay in Pluronic F68/Water mixtures: A Promising Drug Carrier
Nunzia Lauriello (Politecnico di Torino, Turin, Italy)
16/09/25, 12:00
102. 113 - Thermal Treatment (Pyrolysis) for PFAS Removal and Degradation in Contaminated Sediments and Landfill Leachate-Derived Materials
Carla Maggetti (Department SIMAU, Marche Polytechnic University (UNIVPM), Ancona, Italy)
16/09/25, 12:00
166. 227 - Novel continuous cultivation of purple phototrophic bacteria fed with gaseous VFAs using L/G membrane contactor for single cell protein production
Nicola Frison (Department of Biotechnology, University of Verona, Verona, Italy)
16/09/25, 12:00
93. 53 - Enhancing heat management in compact Fischer–Tropsch reactors via structured internals with POCS design
Martino Panzeri (Laboratory of Catalysis and Catalytic Processes, Politecnico di Milano, Milan, Italy)
16/09/25, 12:00
167. 146 - Polymers in fast flows
Giovanni Ianniruberto (Università Federico II, Napoli, Italy)
16/09/25, 12:15
103. 216 - Understanding Fine and Ultrafine Particle-Droplet Interactions in Wet Electrostatic Scrubbers via Mechanistic Modeling
Arianna Parisi (Università di Napoli Federico II – Dipartimento di Ingegneria Chimica, dei Materiali e della Produzione Industriale, Napoli, Italy)
16/09/25, 12:15
187. 66 - Process Analytical Technology in Food: Rheo-Raman Monitoring of Milk Coagulation as a Case Study
Leonardo Sibono (Dipartimento di Ingegneria Meccanica, Chimica e dei Materiali, Università degli Studi di Cagliari, Cagliari, Italy;)
16/09/25, 12:15
94. 86 - Inferring equilibrium and pseudo-equilibrium pVT properties of super-glassy polymers from gas solubility data
Roberto Parchi (Department of Civil, Chemical, Environmental and Materials Engineering, University of Bologna, Bologna, Italy)
16/09/25, 12:15
95. 123 - Fe-based Fischer-Tropsch optimization for e-kerosene production
Samir Bensaid (Politecnico di Torino, DISAT, Turin (Italy))
16/09/25, 12:30
114. 235 - Efficient NMPC Strategies for Thermal Stress Mitigation in Steam Turbines Powered by Solar Plants
Gabriele Pannocchia (University of Pisa, Pisa, Italia)
16/09/25, 12:30
168. 28 - Performances of a non-conventional methanol reactor
Grazia Leonzio (Cagliari University, Department of Mechanical, Chemical and Materials Engineering, Cagliari, Italy)
16/09/25, 12:30
104. 73 - Study of the flow properties of particulates at process conditions
Massimo Poletto (Dipartimento di Ingegneria Industriale, Università di Salerno, Fisciano (SA), Italy)
16/09/25, 12:30
105. 201 - Kinetic model for the design of chlorite-based wet oxidative scrubber for NOx capture
Domenico Ricchiari (Department of Chemical, Materials and Production Engineering, University of Naples Federico II, Naples, Italy)
16/09/25, 12:45
169. 249 - Integrated Anaerobic Digestion and Chlorella vulgaris Cultivation for Biogas Upgrading and Biomass Valorization
Shabnam Mirizadeh (University of Genoa, Department of Civil, Chemical, and Environmental Engineering, Genova, Italy)
16/09/25, 12:45
96. 252 - Techno-economic analysis of direct biogas methanation: assessment of Minimum Selling Price under different process configurations and depreciation schemes
Matteo Tommasi (Chemical Plants and Industrial Chemistry Group, Dip. Chimica, Università degli Studi di Milano and CNR-SCITEC, Milan, Italy; Université de Sherbrooke, Département de génie chimique et de génie biotechnologique, Sherbrooke Québec, Canada)
16/09/25, 12:45
115. 59 - From Early Warning Systems to Risk Assessment: Embedding the Concept of Water Sanitation and Safety Plans into the Urban Water Cycle for Resilient Water Management
Federica Simonetti (Department of Science and Engineering of Matter, Environment and Urban Planning, Marche Polytechnic University, Ancona, Italy)
16/09/25, 12:45
106. 204 - Analysis and comparison of Thermal and Electrified Pyrolysis for Plastic Waste Valorization: A Pathway Towards Circular Economy and Low-Carbon Fuels
Valentina Segneri (“Sapienza” University of Rome, Dept. of Chemical Engineering Materials Environment, Rome, Italy)
16/09/25, 13:00
97. 243 - Experimental characterization and cycle operation of a Directly Irradiated Fluidized Bed Autothermal Reactor
Maurizio Troiano (Università degli Studi di Napoli Federico II, Naples, Italy)
16/09/25, 13:00
170. 33 - Development of innovative chemical processes for the recycling of synthetic textiles
Diego Penzo (Department of Industrial Engineering (University of Padua, Padua, Italy))
16/09/25, 13:00
116. 94 - Supporting ammonia catalysts development through machine learning
Edoardo Tamiazzo (R&D Basic Research Department, CASALE SA, Lugano LVGA, Switzerland)
16/09/25, 13:00
117. 208 - Explainable Machine Learning for Batch Chemical Processes
Mattia Vallerio (CMIC Department "Giulio Natta", Politecnico di Milano, Milan, Italy)
16/09/25, 13:15
107. 80 - Challenges and advances in quantifying odour emissions from industrial sources: a case study on oil refinery tanks
Francesca Tagliaferri (Politecnico di Milano, Department of Chemistry, Materials and Chemical Engineering “Giulio Natta”, Milano, Italy)
16/09/25, 13:15
281. Decarbonization of energy systems
Enrico Tronconi (Politecnico di Milano) , Leonardo Tognotti (Università di Pisa)
16/09/25, 14:30
148. 11 - There are three elephants in the classroom: Can you see them?
Massimiliano Barolo (CAPE-Lab – Computer-Aided Process Engineering Laboratory. Department of Industrial Engineering University of Padova, Padova (Italy))
16/09/25, 15:45
124. 162 - An optimised spouted bed reactor for hydrogen production
Francesco Ciresa (Department of Civil, Chemical and Environmental Engineering, University of Genoa, Genoa, Italy)
16/09/25, 15:45
132. 20 - Impact of Non-Ideality on Stability and Performance of Reactors for Benzaldehyde Production
Giuseppe Andriani (Università degli Studi di Padova, Dipartimento di Ingegneria Industriale, Padova, Italia.)
16/09/25, 15:45
73. 37 - Engineering a pyro-electrohydrodynamic approach for a high-sensitive and efficient jet printing of biomolecules
Stefania Carbone (Department of Chemicals, Materials and Production Engineering, University of Naples Federico II, Naples, Italy; Institute of Applied Sciences and Intelligent Systems (ISASI), National Research Council of Italy (CNR), Pozzuoli (NA) Italy.)
16/09/25, 15:45
125. 115 - Study of intensified and electrified reactors for low-carbon hydrogen production
Nicole Bendazzoli (Politecnico di Milano, Dipartimento di Energia, Milano (Italy))
16/09/25, 16:00
133. 13 - A modelling framework to represent the complementary chromatic adaptation of cyanobacteria grown in consortia with green microalgae
Giulio Di Carlo (CAPE-Lab (Università degli Studi di Padova, Padova, Italy))
16/09/25, 16:00
142. 17 - Modelling Causal Mechanisms in Metabolic Disorders Integrating Omics Data
Gaia Lazzari (Department of Civil, Chemical, Environmental, and Materials Engineering (DICAM), Alma Mater Studiorum - University of Bologna, Bologna, Italy)
16/09/25, 16:00
150. 3 - Challenging students with open multidisciplinary problems: A case study concerning sustainable technologies
Federico d’Amore (CAPE-Lab - Computer-Aided Process Engineering Laboratory, Department of Industrial Engineering, University of Padova, Padova, Italy)
16/09/25, 16:00
126. 192 - TiO₂-based photocatalysts for hydrogen production from lactic acid: a supercritical antisolvent approach
Iolanda De Marco (Department of Industrial Engineering, University of Salerno, Fisciano, Salerno, Italy)
16/09/25, 16:15
151. 217 - Embedding Sustainability Awareness into Unit Operations Courses
Francesco Di Natale (Università di Napoli Federico II – Dipartimento di Ingegneria Chimica, dei Materiali e della Produzione Industriale, Napoli, Italy)
16/09/25, 16:15
134. 51 - Preserving the past through chemical engineering: Safe and sustainable applications in archives and libraries
Davide Fissore (Politecnico di Torino, Dipartimento di Scienza Applicata e Tecnologia, Torino, Italy)
16/09/25, 16:15
143. 85 - Development of a multianalyte electrochemical sensor for uric acid, H2O2, and pH detection for respiratory disease biomonitoring
Federico Massaro (Università degli Studi di Palermo, Palermo, Italy)
16/09/25, 16:15
135. 18 - Dynamic Process Simulation and Kinetic Modeling of Hydrogenation and Dehydrogenation Reactions in LOHC Reactor Systems
Andrea Mio (Department of Engineering and Architecture, University of Trieste, Italy)
16/09/25, 16:30
127. 24 - Lignin-based nanomaterials: towards a new generation of electrocatalyst
Marco Antonio Di Francia (Department of Chemical, Materials and Production Engineering, University of Naples Federico II, Naples, Italy)
16/09/25, 16:30
145. 71 - A Vascularized 3D Neuroblastoma Model for In Vitro Drug Screening and Tumor Microenvironment Studies
Marianna Peditto (Department of Industrial Engineering, University of Padua, Padua, ITALY)
16/09/25, 16:30
152. 88 - Machine learning for chemical and process engineering: introducing data-centric thinking into Chemical Engineering curricula
Pierantonio Facco (Università di Padova)
16/09/25, 16:30
137. 124 - Electrochemical conversion of CO2 using different cathodes: role of current density and pressure
Federica Proietto (Dipartimento di Ingegneria, Viale delle Science, Università degli Studi di Palermo, Palermo, Italy)
16/09/25, 16:45
128. 144 - CO2 capture with MDEA-DGA blends in a pilot-scale absorption-regeneration plant
Domenico Flagiello (Department of Chemical, Materials and Production Engineering, University of Naples Federico II, Naples, Italy)
16/09/25, 16:45
146. 195 - Design and Mixing Performance of a Hybrid Split-and-Recombine Micromixer toward Nanoparticle Production
Daniele Tammaro (Department of Chemical, Materials and Production Engineering, University of Naples Federico II, Naples, Italy)
16/09/25, 16:45
153. 89 - Chemical Engineering evolution asks for new educational strategies
Mario Grassi (Department of Engineering and Architecture, University of Trieste, Trieste, Italy)
16/09/25, 16:45
138. 143 - Alternative Technologies for Hydrogen Supply in the Framework of Decarbonization of Manufacturing Industries
Federica Ricci (LISES, Alma Mater Studiorum, University of Bologna, Bologna, Italy)
16/09/25, 17:00
154. 149 - “Progetto mentori”: ten years of experience of a peer mentoring program
Onofrio Scialdone (Dipartimento di Ingegneria, Università degli Studi di Palermo, Palermo, Italy)
16/09/25, 17:00
147. 232 - Microfluidic characterisation of cell mechanical properties
Massimiliano Maria Villone (Department of Chemical, Materials, and Manufacturing Engineering, University of Naples Federico II, Naples, Italy)
16/09/25, 17:00
129. 78 - Effect of Water vapor in polymer with Intrinsic Microporosity for carbon capture applications
Marco Giacinti Baschetti (University of Bologna, Bologna, Italy)
16/09/25, 17:00
155. 209 - Industrial Data Analytics: Core Machine-Learning Concepts for the Chemical-Engineering Curriculum
Mattia Vallerio (CMIC Department "Giulio Natta", Politecnico di Milano, Milan, Italy)
16/09/25, 17:15
130. 34 - The role of polymers in the CO2 transportation infrastructure: experimental characterization and model analysis
Matteo Minelli (Dept. of Civil, Chemical, Environmental and Material Engineering (University of Bologna, Italy))
16/09/25, 17:15
198. 79 - A safe transition towards sustainable decarbonized processes
Valerio Cozzani (Laboratory of Industrial Safety and Environmental Sustainability (Alma Mater Studiorum – University of Bologna, Bologna, Italy))
16/09/25, 17:15
131. 184 - Biogas Reforming for Bio-Chemicals Production in Italy
Loretta Salano (Politecnico di Milano, CMIC Dept. “Giulio Natta”, Milano, Italy)
16/09/25, 17:30
4. Assemblea GRICU
16/09/25, 17:45
282. Chemical Engineering Education
Alessandro Galia (Università degli Studi di Palermo) , Fabrizio Bezzo (Università di Padova)
17/09/25, 08:30
177. 32 - Systematic analysis of mechanistic metabolic disruptions in human inherited metabolic disorders
Ramin Amiri (University of Bologna – Department of Civil, Chemical, Environmental and Materials Engineering (DICAM), Bologna, Italy)
17/09/25, 09:30
171. 46 - Techno-economic insights on biological hydrogen production through an integrated dark- and photo-fermentation process
Elena Barbera (Department of Industrial Engineering DII, University of Padova, Italy)
17/09/25, 09:30
156. 47 - Hydrogen High-Pressure Gas Storage in Type IV Tanks: A Molecular Simulation Study on Hydrogen Permeation in Polyamide 6 Liner Under Dry and Humid Conditions
Omar Atiq (Department of Civil, Chemical, Environmental and Material Engineering, (DICAM), Alma Mater Studiorum – Università di Bologna, Bologna, Italy; Dutch Polymer Institute (DPI), Eindhoven, the Netherlands)
17/09/25, 09:30
178. 106 - Tailoring Thermo-responsive Transitions by Engineering the Hydrophobic Core of Polymer Nanoparticles
Giuseppe Nunziata (Department of Chemistry, Materials and Chemical Engineering “G.Natta” (Politecnico di Milano, Milan, Italy))
17/09/25, 09:45
172. 137 - Development of Carboxymethylated Nanocellulose-Ionic Liquid Membranes for CO2 Capture Under Tunable Humidity Conditions
Zahra Maghazeh (Department of Civil, Chemical, Environmental and Materials Engineering, University of Bologna, Bologna, Italy)
17/09/25, 09:45
157. 265 - Effect of non-catalytic surface on Methane Pyrolysis for Hydrogen and Carbon Production: an experimental and modelling approach
Emmanuel Busillo (Department of Chemical Engineering, Materials, Environment, Sapienza University, Rome, Italy )
17/09/25, 09:45
158. 169 - Optimization of a sustainable solvent-based process for elastane separation and recycling from blended textiles
Mariangela Guastaferro (Department of Civil and Industrial Engineering, University of Pisa, Pisa, Italy)
17/09/25, 10:00
173. 4 - An overview of hydrogen storage in aqueous formate solutions
Danilo Russo (Dipartimento di Ingegneria Chimica, dei Materiali e della Produzione Industriale, Università degli Studi di Napoli Federico II, Napoli, Italia)
17/09/25, 10:00
179. 56 - Design of an enzyme-based bioreactor for anticancer drugs screening: kinetic evaluation of Lactate Dehydrogenase enzyme with different inhibitors
Chiara Vincenzi (Politecnico di Torino, Turin, Italy)
17/09/25, 10:00
180. 105 - Electrical Resistance Tomography as a Process Analytical Technology in the pharmaceutical industry
Nicodemo Di Pasquale (University of Bologna, Department of Industrial Chemistry, Bologna, Italy)
17/09/25, 10:15
159. 175 - Analysis and comparison of sustainable ethylene production processes
Grazia Leonzio (bCagliari University, Department of Mechanical, Chemical and Materials Engineering, Cagliari, Italy)
17/09/25, 10:15
174. 248 - Engineering a non-thermal plasma electrochemical device for decentralized ammonia production at ambient conditions
Marco Francesco Torre (Department of Chemical, Biological, Pharmaceutical and Environmental Sciences (ChiBioFarAm) – University of Messina, ERIC aisbl and CASPE/INSTM, Messina, Italy)
17/09/25, 10:15
160. 219 - Tackling real-stream complexity in the valorization of microalgae HTC wastewater via aqueous phase reforming
Giuseppe Pipitone (Department of Applied Science and Technology, Politecnico di Torino, Turin, Italy)
17/09/25, 10:30
3. 43 - Ni-based catalysts supported onto hazelnut shells-derived hard carbons for H2 and CNM production
Leonardo Suraniti (Dipartimento di Ingegneria chimica materiali ed ambiente, Università “Sapienza” di Roma, 00184 Roma, Italia)
17/09/25, 10:30
141. 91 - LF-NMR and muco-obstructive lung diseases
Mario Grassi (Dept of Eng. and Architecture, University of Trieste, Trieste, Italy)
17/09/25, 10:30
161. 107 - PVDF bilayer electrospun nanostructured composite catalytic membranes for dye degradation by hybrid advanced oxidation processes
Carlo Boaretti (University of Padova, Padova, Italy)
17/09/25, 10:45
176. 132 - Zeolite effect on Fe-based Fischer-Tropsch for e-fuel production
Samir Bensaid (Politecnico di Torino, DISAT, Turin (Italy))
17/09/25, 10:45
189. 111 - Temperature-Programmed Desorption as a Tool for Kinetic Analysis of NH₃ Decomposition on Ru/Al₂O₃ and Ru/CeO₂
Ivan Conti (Dipartimento di Energia, Politecnico di Milano, Milano, Italy)
17/09/25, 11:30
181. 181 - Deep Learning-Based Surrogate Model for Predicting Air Permeability of Technical Textiles
Eleonora Bianca (Politecnico di Torino, Torino, Italy)
17/09/25, 11:30
196. 210 - Chemical recycling of thermosetting epoxy composite from renewable resources manufactured by the Vacuum-Assisted Resin Infusion process (VARI)
Lorenzo Bonadies (Department of Industrial Engineering, University of Salerno, Fisciano, Italy)
17/09/25, 11:30
190. 116 - Influence of the temperature and surface charge on the performance of nanocellulose based facilitated transport membranes for carbon capture
Elena Medri (University of Bologna, Bologna, Italy)
17/09/25, 11:45
182. 127 - Text to Process Simulation
Francesco de Fusco (CMIC Department "Giulio Natta", Politecnico di Milano, Milano, Italy)
17/09/25, 11:45
197. 253 - The crucial role of networked laboratories within Research Infrastructures: the case of the Technological Hall for Pollution Mitigation in the research infrastructure “Integrated Laboratories System for the Environment”
Vincenza Calabrò (Department of Computer Engineering, Modeling, Electronics and Systems (DIMES), University of Calabria, Rende (CS), ITALY )
17/09/25, 11:45
199. 163 - Study of a coupled electrochemical process involving of CO2 reduction and methanol oxidation into formic acid/formate
Paola Meli (University of Palermo, Palermo, Italy)
17/09/25, 12:00
183. 38 - Numerical simulation of polymer blending in twin-screw extrusion: A computational primer for a digital twin
Michele Giglio (Dipartimento di Ingegneria Chimica, dei Materiali e della Produzione Industriale, Università degli Studi di Napoli “Federico II”, Napoli, Italy)
17/09/25, 12:00
191. 76 - Upgrading of Biogas to Biomethane via Vacuum Pressure Swing Adsorption: Integrated Experimental and Modeling Study for Sustainable Energy Production
Esther Pancione (Department of Chemical, Materials and Production Engineering, University of Naples Federico II (Naples, Italy))
17/09/25, 12:00
184. 170 - From electrode dynamics to protocol design: a multiscale approach to fast charging of Li-ion batteries
Marco Lagnoni (University of Pisa, Pisa, Italy)
17/09/25, 12:15
193. 179 - Scaling High-Temperature CO2 Capture: Sorbent Development and Circular Approach in Fixed Bed Systems
Eleonora Stefanelli (Dipartimento di Ingegneria Civile e Industriale, University of Pisa, Pisa, Italy)
17/09/25, 12:15
59. 55 - A Generic System Dynamics Model for Integrated Risk Assessment and Safety Management in Chemical Engineering
Julio Ariel Dueñas Santana (Scuola Superiore Meridionale. School for Advanced Studies. Università degli Studi di Napoli Federico II, Napoli, Italia; Dipartimento di Ingegneria Chimica, dei Materiali e della Produzione Industriale, Università degli Studi di Napoli Federico II, Napoli, Italia)
17/09/25, 12:15
194. 153 - Novel Electrified Chemical Plant based on Biogas Combustion for Syngas Generation by in situ CO2 Chemical Transformation
Giuseppe Prenesti (University of Calabria, Department of Computer Engineering, Modelling, Electronics and Systems Engineering (DIMES), Rende, Italy)
17/09/25, 12:30
185. 220 - Upscaling of lithium-ion battery models: from the pore-scale to the cell-scale through homogenization
Alessio Lombardo Pontillo (Department of Applied Science and Technology, Politecnico di Torino, Torino, Italy)
17/09/25, 12:30
201. 50 - Optimised Pilot Biorefinery Processes for the Valorisation of Seafood By-products into Valuable Biofertilisers and Biofuels
Salman Nisar (Department of Materials, Environmental and Urban Engineering, Università Politecnica delle Marche, Ancona, Italy)
17/09/25, 12:30
195. 185 - Redox Flow Batteries for Long-Duration Energy Storage: Toward Scalable and Sustainable Grid Solutions
Eleonora Natale (Politecnico di Milano)
17/09/25, 12:45
186. 22 - Modelling Methods for Improving the Scale-up of Industrial Multiphase Reactors
Giuseppina Montante (University of Bologna, Department of Industrial Chemistry, Bologna, Italy)
17/09/25, 12:45
113. 140 - Use of digital twins to assess malicious manipulations of BPCS and SIS in green energy production systems
Antonio Manzi (LISES - Dipartimento di Ingegneria Civile, Chimica, Ambientale e dei Materiali, Alma Mater Studiorum - Università di Bologna, Bologna (Italy))
17/09/25, 13:00
188. 213 - Adaptive soft sensor to predict alite fraction clinker production through quasi-ensemble PLS modelling
Mihnea Stefan (CAPE-Lab, Computer Aided Process Engineering Laboratory, University of Padova, Department of Industrial Engineering, Padova, Italy; FLSmidth Cement A/S, Green Innovation, Copenhagen, Denmark)
17/09/25, 13:15
24. Welcome, greetings & intro
17/09/25, 15:00

prof. Piero Salatino, Chair of GRICU Phd School 2025
prof. Flavio Manenti, Chair of CAPE Forum 2025
25. Introduction to CAPE topics
Flavio Manenti (Politecnico di Milano)
17/09/25, 15:20
26. Industrial Data Science
Mattia Vallerio (Politecnico di Milano)
17/09/25, 15:40
27. Workshop: Automatic Generation of Best Surrogate Model
Luis Felipe Sánchez (Politecnico di Milano) , Mattia Vallerio (Politecnico di Milano)
17/09/25, 17:00
28. Model-based Design of Experiments
Fabrizio Bezzo (Università di Padova)
18/09/25, 09:00
29. Introduction to Design of Experiments
Pierantonio Facco (Università di Padova)
18/09/25, 09:40
30. Workshop: Applications on Design of Experiments
Pierantonio Facco (Università di Padova)
18/09/25, 11:00
65. Fundamentals on Process Optimization
Gabriele Pannocchia (University of Pisa, Pisa, Italia)
18/09/25, 14:00
66. Methods and Tools on Process Optimization
Gabriele Pannocchia (University of Pisa, Pisa, Italia)
18/09/25, 14:40
67. Workshop: Applications on Process Optimization
Marco Vaccari (Universitá di Pisa, Pisa, Italia)
18/09/25, 16:00
68. Biomass, Biofuels, and Biorefineries: the Technological Platform
Leonardo Tognotti (Università di Pisa)
19/09/25, 09:00
69. Unlocking the Potential of Biofuels: Challenges and Technological Innovation
Isabella De Bari (ENEA)
19/09/25, 10:00
70. E-Fuels and Fuel Cells
Barbara Bosio (Università di Genova)
19/09/25, 11:30
118. Hydrogen Production Technologies: From Fossil Fuels to Renewable Sources
Alberto Giaconia (ENEA)
19/09/25, 14:00
119. Hydrogen-based Vectors: Gaseous
Fabrizio Scala (Università degli Studi di Napoli Federico II)
19/09/25, 15:30
120. Hydrogen-based Vectors: Liquid
Fabio Salomone (Politecnico di Torino)
19/09/25, 16:30
283. Decarbonization of Chemical Processes: Electrification
Enrico Tronconi (Politecnico di Milano)
20/09/25, 09:00
284. Decarbonization of Industrial Processes: Low-carbon Heat
Alessandro Galia (Università degli Studi di Palermo)
20/09/25, 10:30
285. Smart Sector Energy Integration: a Chemical Engineer’s View
PIERO SALATINO (Università degli Studi di Napoli Federico II)
20/09/25, 11:30
144. 108 - Tailoring Thermo-responsive Transitions by Engineering the Hydrophobic Core of Polymer Nanoparticles
Giuseppe Nunziata (Department of Chemistry, Materials and Chemical Engineering “G.Natta” (Politecnico di Milano, Milan, Italy))
21. 203 - Design and characterization of a starch/chitosan bilayer film for use in sustainable food packaging
Sarah Siciliano (Department of Computer Science, Modeling, Electronics and Systems Engineering (DIMES), University of Calabria, Rende (Italy))
136. 230 - Valorization of Sargassum spp. through Anaerobic Digestion: effects of non-chemical pretreatments and Fe2O3 nanoparticles on bio-methane production
Rosy Paletta (Department of Computer Engineering, Modelling, Electronics and Systems (DIMES), University of Calabria, Rende, Italy)
46. 33 - Development of innovative chemical processes for the recycling of synthetic textiles
Diego Penzo (Department of Industrial Engineering, University of Padua, Padua, Italy)
121. Decarbonization of Chemical Processes: Electrification
Enrico Tronconi (Politecnico di Milano)
122. Decarbonization of Industrial Processes: Low-carbon Heat
Alessandro Galia (Università degli Studi di Palermo)
123. Smart Sector Energy Integration: a Chemical Engineer’s View
PIERO SALATINO (Università degli Studi di Napoli Federico II)
Indico
Powered by Indico
Your browser is out of date!

Update your browser to view this website correctly. Update my browser now

×